Twin Reverb Head Cabinet

I use 3/4" pine that I select and assembled using strong half blind dovetail glued joints .  I then router the exterior corners so you can easily install standard corner protectors if you so choice. The front panels is1/2" birch plywood and the back panel is 3/8” baltic birch .  All the cabinets I sell are sanded to #150 grit when they are mailed off to you the buyer.

26 1/8’’ wide x 9 1/2’’ tall x 9 1/2’’ deep


Chassis cutout is 24 5/8’’ wide x 1 7/8’’