Boogie Mark II C- 1x12 Combo

I use 3/4" pine that I select and assembled using strong half blind dovetail glued joints .  I then router the exterior corners so you can easily install standard corner protectors if you so choice. The front speaker baffles is 1/2" birch plywood  and the back panel is 3/4’’ thick pine.  All the cabinets I sell are sanded to #150 grit when they are mailed off to you the buyer.

17 1/2’‘ tall x 18 9/16’‘ wide x 10 3/4’’ at the bottom with a slant . Speaker bolts and nut installed for easy speaker installation

Chassis cutout is 17 1/16’’ wide x 2 /916’’ tall  . This cabinet will also fit the mesa boogie vintage 1989 mark III and mark II-A and mark II-B and mark II-C and also the .50 caliber + .


Your chassis must measure 17’’ wide x 2 3/8’’ tall

Rear load cabinet